# generated by PrusaSlicer 2.7.4+win64 on 2024-05-15 at 16:41:41 UTC [print:0.10 mm Detail @ AMB 0.4 nozzle] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = rectilinear bottom_solid_layers = 4 bottom_solid_min_thickness = 0 bridge_acceleration = 200 bridge_angle = 0 bridge_flow_ratio = 0.6 bridge_speed = 30 brim_separation = 0 brim_type = outer_only brim_width = 10 compatible_printers = "AMB C1 - 0.4 nozzle" compatible_printers_condition = complete_objects = 0 default_acceleration = 500 dont_support_bridges = 1 draft_shield = disabled elefant_foot_compensation = 0.3 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 500 external_perimeter_extrusion_width = 0.5 external_perimeter_speed = 80% external_perimeters_first = 0 extra_perimeters = 1 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.5 fill_angle = 35 fill_density = 20% fill_pattern = adaptivecubic first_layer_acceleration = 800 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.5 first_layer_height = 0.2 first_layer_speed = 30 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 0 gap_fill_speed = 0 gcode_comments = 0 gcode_label_objects = disabled gcode_resolution = 0.0125 gcode_substitutions = M116;"M116 S10";; infill_acceleration = 500 infill_anchor = 1 infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.5 infill_first = 0 infill_overlap = 30% infill_speed = 80 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.1 max_print_speed = 80 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 600 perimeter_extruder = 1 perimeter_extrusion_width = 0.5 perimeter_generator = arachne perimeter_speed = 80 perimeters = 3 post_process = print_settings_id = raft_contact_distance = 0.3 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 6 skirt_height = 1 skirts = 0 slice_closing_radius = 0.049 slicing_mode = regular small_perimeter_speed = 40 solid_infill_acceleration = 800 solid_infill_below_area = 10 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.5 solid_infill_speed = 80 spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 1 support_material_angle = 0 support_material_auto = 0 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 0 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.38 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 20 support_material_with_sheath = 1 support_material_xy_spacing = 50% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 0 thin_walls = 1 top_fill_pattern = rectilinear top_infill_extrusion_width = 0.45 top_solid_infill_acceleration = 600 top_solid_infill_speed = 60 top_solid_layers = 5 top_solid_min_thickness = 0 travel_acceleration = 1500 travel_speed = 500 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 0 wipe_tower_acceleration = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_flow = 100% wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 [print:0.1mm Detail @ C1 0.6 nozzle] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = alignedrectilinear bottom_solid_layers = 3 bottom_solid_min_thickness = 0 bridge_acceleration = 200 bridge_angle = 0 bridge_flow_ratio = 0.6 bridge_speed = 30 brim_separation = 0 brim_type = outer_only brim_width = 0 compatible_printers = "AMB C1 - 0.6 nozzle";"AMBOT cooperative" compatible_printers_condition = complete_objects = 0 default_acceleration = 500 dont_support_bridges = 1 draft_shield = disabled elefant_foot_compensation = 0.3 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 500 external_perimeter_extrusion_width = 0.7 external_perimeter_speed = 80% external_perimeters_first = 0 extra_perimeters = 1 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.7 fill_angle = 35 fill_density = 20% fill_pattern = adaptivecubic first_layer_acceleration = 800 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.66 first_layer_height = 0.2 first_layer_speed = 30 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 0 gap_fill_speed = 0 gcode_comments = 0 gcode_label_objects = disabled gcode_resolution = 0.0125 gcode_substitutions = infill_acceleration = 500 infill_anchor = 1 infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.7 infill_first = 0 infill_overlap = 30% infill_speed = 80 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.1 max_print_speed = 80 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 600 perimeter_extruder = 1 perimeter_extrusion_width = 0.7 perimeter_generator = arachne perimeter_speed = 80 perimeters = 3 post_process = print_settings_id = raft_contact_distance = 0.3 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 6 skirt_height = 1 skirts = 0 slice_closing_radius = 0.049 slicing_mode = regular small_perimeter_speed = 40 solid_infill_acceleration = 800 solid_infill_below_area = 10 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.7 solid_infill_speed = 80 spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 0 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 0 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.7 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 20 support_material_with_sheath = 1 support_material_xy_spacing = 50% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 0 thin_walls = 1 top_fill_pattern = monotonic top_infill_extrusion_width = 0.66 top_solid_infill_acceleration = 600 top_solid_infill_speed = 60 top_solid_layers = 4 top_solid_min_thickness = 0 travel_acceleration = 1500 travel_speed = 500 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 0 wipe_tower_acceleration = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_flow = 100% wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 [print:0.20 mm Detail @ AMB 0.8 nozzle] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = alignedrectilinear bottom_solid_layers = 3 bottom_solid_min_thickness = 0 bridge_acceleration = 200 bridge_angle = 0 bridge_flow_ratio = 0.6 bridge_speed = 30 brim_separation = 0 brim_type = outer_only brim_width = 0 compatible_printers = "AMB C1 - 0.8 Nozzle";"AMBOT cooperative" compatible_printers_condition = complete_objects = 0 default_acceleration = 500 dont_support_bridges = 1 draft_shield = disabled elefant_foot_compensation = 0.3 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 500 external_perimeter_extrusion_width = 0.9 external_perimeter_speed = 80% external_perimeters_first = 0 extra_perimeters = 1 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.9 fill_angle = 35 fill_density = 20% fill_pattern = adaptivecubic first_layer_acceleration = 800 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.9 first_layer_height = 0.3 first_layer_speed = 30 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 0 gap_fill_speed = 0 gcode_comments = 0 gcode_label_objects = disabled gcode_resolution = 0.0125 gcode_substitutions = M116;"M116 S10";; infill_acceleration = 500 infill_anchor = 1 infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.9 infill_first = 0 infill_overlap = 25% infill_speed = 80 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.3 max_print_speed = 80 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 600 perimeter_extruder = 1 perimeter_extrusion_width = 0.9 perimeter_generator = arachne perimeter_speed = 80 perimeters = 3 post_process = print_settings_id = raft_contact_distance = 0.3 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 6 skirt_height = 1 skirts = 0 slice_closing_radius = 0.049 slicing_mode = regular small_perimeter_speed = 40 solid_infill_acceleration = 800 solid_infill_below_area = 10 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.9 solid_infill_speed = 80 spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 0 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 0 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.7 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 20 support_material_with_sheath = 1 support_material_xy_spacing = 50% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 0 thin_walls = 1 top_fill_pattern = monotonic top_infill_extrusion_width = 0.84 top_solid_infill_acceleration = 600 top_solid_infill_speed = 60 top_solid_layers = 4 top_solid_min_thickness = 0 travel_acceleration = 1500 travel_speed = 500 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 0 wipe_tower_acceleration = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_flow = 100% wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 [print:0.20 mm Quality @ AMB 0.4 nozzle] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = rectilinear bottom_solid_layers = 4 bottom_solid_min_thickness = 0 bridge_acceleration = 200 bridge_angle = 0 bridge_flow_ratio = 0.6 bridge_speed = 30 brim_separation = 0 brim_type = outer_only brim_width = 10 compatible_printers = "AMB C1 - 0.4 nozzle" compatible_printers_condition = complete_objects = 0 default_acceleration = 500 dont_support_bridges = 1 draft_shield = disabled elefant_foot_compensation = 0.3 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 500 external_perimeter_extrusion_width = 0.5 external_perimeter_speed = 80% external_perimeters_first = 0 extra_perimeters = 1 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.5 fill_angle = 35 fill_density = 20% fill_pattern = adaptivecubic first_layer_acceleration = 800 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.5 first_layer_height = 0.3 first_layer_speed = 30 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 0 gap_fill_speed = 0 gcode_comments = 0 gcode_label_objects = disabled gcode_resolution = 0.0125 gcode_substitutions = M116;"M116 S10";; infill_acceleration = 500 infill_anchor = 1 infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.5 infill_first = 0 infill_overlap = 30% infill_speed = 80 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.2 max_print_speed = 80 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 600 perimeter_extruder = 1 perimeter_extrusion_width = 0.5 perimeter_generator = arachne perimeter_speed = 80 perimeters = 3 post_process = print_settings_id = raft_contact_distance = 0.3 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 6 skirt_height = 1 skirts = 0 slice_closing_radius = 0.049 slicing_mode = regular small_perimeter_speed = 40 solid_infill_acceleration = 800 solid_infill_below_area = 10 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.5 solid_infill_speed = 80 spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 1 support_material_angle = 0 support_material_auto = 0 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 0 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.38 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 20 support_material_with_sheath = 1 support_material_xy_spacing = 50% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 0 thin_walls = 1 top_fill_pattern = rectilinear top_infill_extrusion_width = 0.45 top_solid_infill_acceleration = 600 top_solid_infill_speed = 60 top_solid_layers = 5 top_solid_min_thickness = 0 travel_acceleration = 1500 travel_speed = 500 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 0 wipe_tower_acceleration = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_flow = 100% wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 [print:0.2mm Quality @ C1 0.6 nozzle] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = alignedrectilinear bottom_solid_layers = 3 bottom_solid_min_thickness = 0 bridge_acceleration = 200 bridge_angle = 0 bridge_flow_ratio = 0.6 bridge_speed = 30 brim_separation = 0 brim_type = outer_only brim_width = 0 compatible_printers = "AMB C1 - 0.6 nozzle";"AMBOT cooperative" compatible_printers_condition = complete_objects = 0 default_acceleration = 500 dont_support_bridges = 1 draft_shield = disabled elefant_foot_compensation = 0.3 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 500 external_perimeter_extrusion_width = 0.7 external_perimeter_speed = 80% external_perimeters_first = 0 extra_perimeters = 1 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.7 fill_angle = 35 fill_density = 20% fill_pattern = adaptivecubic first_layer_acceleration = 800 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.66 first_layer_height = 0.2 first_layer_speed = 30 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 0 gap_fill_speed = 0 gcode_comments = 0 gcode_label_objects = disabled gcode_resolution = 0.0125 gcode_substitutions = infill_acceleration = 500 infill_anchor = 1 infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.7 infill_first = 0 infill_overlap = 30% infill_speed = 80 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.2 max_print_speed = 80 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 600 perimeter_extruder = 1 perimeter_extrusion_width = 0.7 perimeter_generator = arachne perimeter_speed = 80 perimeters = 3 post_process = print_settings_id = raft_contact_distance = 0.3 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 6 skirt_height = 1 skirts = 0 slice_closing_radius = 0.049 slicing_mode = regular small_perimeter_speed = 40 solid_infill_acceleration = 800 solid_infill_below_area = 10 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.7 solid_infill_speed = 80 spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 0 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 0 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.7 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 20 support_material_with_sheath = 1 support_material_xy_spacing = 50% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 0 thin_walls = 1 top_fill_pattern = monotonic top_infill_extrusion_width = 0.66 top_solid_infill_acceleration = 600 top_solid_infill_speed = 60 top_solid_layers = 4 top_solid_min_thickness = 0 travel_acceleration = 1500 travel_speed = 500 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 0 wipe_tower_acceleration = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_flow = 100% wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 [print:0.30 mm Draft @ AMB 0.4 nozzle] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = rectilinear bottom_solid_layers = 3 bottom_solid_min_thickness = 0 bridge_acceleration = 200 bridge_angle = 0 bridge_flow_ratio = 0.6 bridge_speed = 30 brim_separation = 0 brim_type = outer_only brim_width = 0 compatible_printers = "AMB C1 - 0.4 nozzle" compatible_printers_condition = complete_objects = 0 default_acceleration = 500 dont_support_bridges = 1 draft_shield = disabled elefant_foot_compensation = 0.3 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 500 external_perimeter_extrusion_width = 0.5 external_perimeter_speed = 80% external_perimeters_first = 0 extra_perimeters = 1 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.5 fill_angle = 35 fill_density = 15% fill_pattern = adaptivecubic first_layer_acceleration = 800 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.5 first_layer_height = 0.3 first_layer_speed = 30 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 0 gap_fill_speed = 0 gcode_comments = 0 gcode_label_objects = disabled gcode_resolution = 0.0125 gcode_substitutions = M116;"M116 S10";; infill_acceleration = 500 infill_anchor = 1 infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.5 infill_first = 0 infill_overlap = 30% infill_speed = 80 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.3 max_print_speed = 80 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 600 perimeter_extruder = 1 perimeter_extrusion_width = 0.5 perimeter_generator = arachne perimeter_speed = 80 perimeters = 3 post_process = print_settings_id = raft_contact_distance = 0.3 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 6 skirt_height = 1 skirts = 0 slice_closing_radius = 0.049 slicing_mode = regular small_perimeter_speed = 40 solid_infill_acceleration = 800 solid_infill_below_area = 10 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.5 solid_infill_speed = 80 spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 1 support_material_angle = 0 support_material_auto = 0 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 0 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.38 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 20 support_material_with_sheath = 1 support_material_xy_spacing = 50% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 0 thin_walls = 1 top_fill_pattern = rectilinear top_infill_extrusion_width = 0.45 top_solid_infill_acceleration = 600 top_solid_infill_speed = 60 top_solid_layers = 3 top_solid_min_thickness = 0 travel_acceleration = 1500 travel_speed = 500 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 0 wipe_tower_acceleration = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_flow = 100% wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 [print:0.30 mm Quality @ AMB 0.8 Nozzle] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = rectilinear bottom_solid_layers = 3 bottom_solid_min_thickness = 0 bridge_acceleration = 200 bridge_angle = 0 bridge_flow_ratio = 0.6 bridge_speed = 30 brim_separation = 0 brim_type = outer_only brim_width = 5 compatible_printers = "AMB C1 - 0.8 Nozzle";"AMBOT cooperative" compatible_printers_condition = complete_objects = 0 default_acceleration = 500 dont_support_bridges = 1 draft_shield = disabled elefant_foot_compensation = 0.3 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 500 external_perimeter_extrusion_width = 0.84 external_perimeter_speed = 80% external_perimeters_first = 0 extra_perimeters = 1 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.9 fill_angle = 35 fill_density = 15% fill_pattern = adaptivecubic first_layer_acceleration = 800 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.84 first_layer_height = 0.3 first_layer_speed = 30 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 0 gap_fill_speed = 0 gcode_comments = 0 gcode_label_objects = disabled gcode_resolution = 0.0125 gcode_substitutions = M116;"M116 S10";; infill_acceleration = 500 infill_anchor = 1 infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.9 infill_first = 0 infill_overlap = 30% infill_speed = 80 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.3 max_print_speed = 80 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 600 perimeter_extruder = 1 perimeter_extrusion_width = 0.9 perimeter_generator = arachne perimeter_speed = 80 perimeters = 3 post_process = print_settings_id = raft_contact_distance = 0.3 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 6 skirt_height = 1 skirts = 0 slice_closing_radius = 0.049 slicing_mode = regular small_perimeter_speed = 40 solid_infill_acceleration = 800 solid_infill_below_area = 10 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.9 solid_infill_speed = 80 spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 0 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 0 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.7 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 20 support_material_with_sheath = 1 support_material_xy_spacing = 50% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 0 thin_walls = 1 top_fill_pattern = rectilinear top_infill_extrusion_width = 0.84 top_solid_infill_acceleration = 600 top_solid_infill_speed = 60 top_solid_layers = 3 top_solid_min_thickness = 0 travel_acceleration = 1500 travel_speed = 500 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 0 wipe_tower_acceleration = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_flow = 100% wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 [print:0.3mm Normal @ C1 0.6 nozzle] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = alignedrectilinear bottom_solid_layers = 3 bottom_solid_min_thickness = 0 bridge_acceleration = 200 bridge_angle = 0 bridge_flow_ratio = 0.6 bridge_speed = 30 brim_separation = 0 brim_type = outer_only brim_width = 0 compatible_printers = "AMB C1 - 0.6 nozzle";"AMBOT cooperative" compatible_printers_condition = complete_objects = 0 default_acceleration = 500 dont_support_bridges = 1 draft_shield = disabled elefant_foot_compensation = 0.3 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 500 external_perimeter_extrusion_width = 0.7 external_perimeter_speed = 80% external_perimeters_first = 0 extra_perimeters = 1 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.7 fill_angle = 35 fill_density = 20% fill_pattern = adaptivecubic first_layer_acceleration = 800 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.66 first_layer_height = 0.3 first_layer_speed = 30 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 0 gap_fill_speed = 0 gcode_comments = 0 gcode_label_objects = disabled gcode_resolution = 0.0125 gcode_substitutions = infill_acceleration = 500 infill_anchor = 1 infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.7 infill_first = 0 infill_overlap = 30% infill_speed = 80 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.3 max_print_speed = 80 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 600 perimeter_extruder = 1 perimeter_extrusion_width = 0.7 perimeter_generator = arachne perimeter_speed = 80 perimeters = 3 post_process = print_settings_id = raft_contact_distance = 0.3 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 6 skirt_height = 1 skirts = 0 slice_closing_radius = 0.049 slicing_mode = regular small_perimeter_speed = 40 solid_infill_acceleration = 800 solid_infill_below_area = 10 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.7 solid_infill_speed = 80 spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 0 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 0 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.7 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 20 support_material_with_sheath = 1 support_material_xy_spacing = 50% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 0 thin_walls = 1 top_fill_pattern = monotonic top_infill_extrusion_width = 0.66 top_solid_infill_acceleration = 600 top_solid_infill_speed = 60 top_solid_layers = 4 top_solid_min_thickness = 0 travel_acceleration = 1500 travel_speed = 500 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 0 wipe_tower_acceleration = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_flow = 100% wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 [print:0.40 mm Balanced @ AMB 0.8 Nozzle] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = alignedrectilinear bottom_solid_layers = 3 bottom_solid_min_thickness = 0 bridge_acceleration = 200 bridge_angle = 0 bridge_flow_ratio = 0.6 bridge_speed = 30 brim_separation = 0 brim_type = outer_only brim_width = 0 compatible_printers = "AMB C1 - 0.8 Nozzle";"AMBOT cooperative" compatible_printers_condition = complete_objects = 0 default_acceleration = 500 dont_support_bridges = 1 draft_shield = disabled elefant_foot_compensation = 0.3 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 500 external_perimeter_extrusion_width = 0.84 external_perimeter_speed = 80% external_perimeters_first = 0 extra_perimeters = 1 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.9 fill_angle = 35 fill_density = 20% fill_pattern = adaptivecubic first_layer_acceleration = 800 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.84 first_layer_height = 0.4 first_layer_speed = 30 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 0 gap_fill_speed = 0 gcode_comments = 0 gcode_label_objects = disabled gcode_resolution = 0.0125 gcode_substitutions = infill_acceleration = 500 infill_anchor = 1 infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.9 infill_first = 0 infill_overlap = 30% infill_speed = 80 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.4 max_print_speed = 80 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 600 perimeter_extruder = 1 perimeter_extrusion_width = 0.9 perimeter_generator = arachne perimeter_speed = 80 perimeters = 3 post_process = print_settings_id = raft_contact_distance = 0.3 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 6 skirt_height = 1 skirts = 0 slice_closing_radius = 0.049 slicing_mode = regular small_perimeter_speed = 40 solid_infill_acceleration = 800 solid_infill_below_area = 10 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.9 solid_infill_speed = 80 spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 0 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 0 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.7 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 20 support_material_with_sheath = 1 support_material_xy_spacing = 50% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 0 thin_walls = 1 top_fill_pattern = monotonic top_infill_extrusion_width = 0.84 top_solid_infill_acceleration = 600 top_solid_infill_speed = 60 top_solid_layers = 3 top_solid_min_thickness = 0 travel_acceleration = 1500 travel_speed = 500 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 0 wipe_tower_acceleration = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_flow = 100% wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 [print:0.4mm Speed @ C1 0.6 nozzle] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = alignedrectilinear bottom_solid_layers = 3 bottom_solid_min_thickness = 0 bridge_acceleration = 200 bridge_angle = 0 bridge_flow_ratio = 0.6 bridge_speed = 30 brim_separation = 0 brim_type = outer_only brim_width = 0 compatible_printers = "AMB C1 - 0.6 nozzle";"AMBOT cooperative" compatible_printers_condition = complete_objects = 0 default_acceleration = 500 dont_support_bridges = 1 draft_shield = disabled elefant_foot_compensation = 0.3 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 500 external_perimeter_extrusion_width = 0.7 external_perimeter_speed = 80% external_perimeters_first = 0 extra_perimeters = 1 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.7 fill_angle = 35 fill_density = 20% fill_pattern = adaptivecubic first_layer_acceleration = 800 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.66 first_layer_height = 0.4 first_layer_speed = 30 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 0 gap_fill_speed = 0 gcode_comments = 0 gcode_label_objects = disabled gcode_resolution = 0.0125 gcode_substitutions = infill_acceleration = 500 infill_anchor = 1 infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.7 infill_first = 0 infill_overlap = 30% infill_speed = 80 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.4 max_print_speed = 80 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 600 perimeter_extruder = 1 perimeter_extrusion_width = 0.7 perimeter_generator = arachne perimeter_speed = 80 perimeters = 3 post_process = print_settings_id = raft_contact_distance = 0.3 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 6 skirt_height = 1 skirts = 0 slice_closing_radius = 0.049 slicing_mode = regular small_perimeter_speed = 40 solid_infill_acceleration = 800 solid_infill_below_area = 10 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.7 solid_infill_speed = 80 spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 0 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 0 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.7 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 20 support_material_with_sheath = 1 support_material_xy_spacing = 50% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 0 thin_walls = 1 top_fill_pattern = monotonic top_infill_extrusion_width = 0.66 top_solid_infill_acceleration = 600 top_solid_infill_speed = 60 top_solid_layers = 4 top_solid_min_thickness = 0 travel_acceleration = 1500 travel_speed = 500 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 0 wipe_tower_acceleration = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_flow = 100% wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 [print:0.50 mm Speed @ AMB 0.8 Nozzle] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = alignedrectilinear bottom_solid_layers = 3 bottom_solid_min_thickness = 0 bridge_acceleration = 200 bridge_angle = 0 bridge_flow_ratio = 0.6 bridge_speed = 30 brim_separation = 0 brim_type = outer_only brim_width = 10 compatible_printers = "AMB C1 - 0.8 Nozzle";"AMBOT cooperative" compatible_printers_condition = complete_objects = 0 default_acceleration = 500 dont_support_bridges = 1 draft_shield = disabled elefant_foot_compensation = 0.3 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 500 external_perimeter_extrusion_width = 0.84 external_perimeter_speed = 80% external_perimeters_first = 0 extra_perimeters = 1 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.9 fill_angle = 35 fill_density = 20% fill_pattern = adaptivecubic first_layer_acceleration = 800 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.84 first_layer_height = 0.5 first_layer_speed = 30 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 0 gap_fill_speed = 0 gcode_comments = 0 gcode_label_objects = disabled gcode_resolution = 0.0125 gcode_substitutions = infill_acceleration = 500 infill_anchor = 1 infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.9 infill_first = 0 infill_overlap = 30% infill_speed = 80 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.5 max_print_speed = 80 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 600 perimeter_extruder = 1 perimeter_extrusion_width = 0.9 perimeter_generator = arachne perimeter_speed = 80 perimeters = 3 post_process = print_settings_id = raft_contact_distance = 0.3 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 6 skirt_height = 1 skirts = 0 slice_closing_radius = 0.049 slicing_mode = regular small_perimeter_speed = 40 solid_infill_acceleration = 800 solid_infill_below_area = 10 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.9 solid_infill_speed = 80 spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 0 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 0 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.7 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 20 support_material_with_sheath = 1 support_material_xy_spacing = 50% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 0 thin_walls = 1 top_fill_pattern = monotonic top_infill_extrusion_width = 0.84 top_solid_infill_acceleration = 600 top_solid_infill_speed = 60 top_solid_layers = 3 top_solid_min_thickness = 0 travel_acceleration = 1500 travel_speed = 500 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 0 wipe_tower_acceleration = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_flow = 100% wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 [print:0.5mm Draft @ C1 0.6 nozzle] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = alignedrectilinear bottom_solid_layers = 3 bottom_solid_min_thickness = 0 bridge_acceleration = 200 bridge_angle = 0 bridge_flow_ratio = 0.6 bridge_speed = 30 brim_separation = 0 brim_type = outer_only brim_width = 0 compatible_printers = "AMB C1 - 0.6 nozzle";"AMBOT cooperative" compatible_printers_condition = complete_objects = 0 default_acceleration = 500 dont_support_bridges = 1 draft_shield = disabled elefant_foot_compensation = 0.3 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 500 external_perimeter_extrusion_width = 0.7 external_perimeter_speed = 80% external_perimeters_first = 0 extra_perimeters = 1 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.7 fill_angle = 35 fill_density = 20% fill_pattern = adaptivecubic first_layer_acceleration = 800 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.66 first_layer_height = 0.5 first_layer_speed = 30 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 0 gap_fill_speed = 0 gcode_comments = 0 gcode_label_objects = disabled gcode_resolution = 0.0125 gcode_substitutions = infill_acceleration = 500 infill_anchor = 1 infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.7 infill_first = 0 infill_overlap = 30% infill_speed = 80 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.5 max_print_speed = 80 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 600 perimeter_extruder = 1 perimeter_extrusion_width = 0.7 perimeter_generator = arachne perimeter_speed = 80 perimeters = 3 post_process = print_settings_id = raft_contact_distance = 0.3 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 6 skirt_height = 1 skirts = 0 slice_closing_radius = 0.049 slicing_mode = regular small_perimeter_speed = 40 solid_infill_acceleration = 800 solid_infill_below_area = 10 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.7 solid_infill_speed = 80 spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 0 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 0 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.7 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 20 support_material_with_sheath = 1 support_material_xy_spacing = 50% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 0 thin_walls = 1 top_fill_pattern = monotonic top_infill_extrusion_width = 0.66 top_solid_infill_acceleration = 600 top_solid_infill_speed = 60 top_solid_layers = 3 top_solid_min_thickness = 0 travel_acceleration = 1500 travel_speed = 500 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 0 wipe_tower_acceleration = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_flow = 100% wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 [print:0.60 mm Draft @ AMB 0.8 Nozzle] arc_fitting = disabled avoid_crossing_curled_overhangs = 0 avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = rectilinear bottom_solid_layers = 3 bottom_solid_min_thickness = 0 bridge_acceleration = 200 bridge_angle = 0 bridge_flow_ratio = 0.6 bridge_speed = 30 brim_separation = 0 brim_type = outer_only brim_width = 0 compatible_printers = "AMB C1 - 0.8 Nozzle";"AMBOT cooperative" compatible_printers_condition = complete_objects = 0 default_acceleration = 500 dont_support_bridges = 1 draft_shield = disabled elefant_foot_compensation = 0.3 enable_dynamic_overhang_speeds = 0 external_perimeter_acceleration = 500 external_perimeter_extrusion_width = 0.84 external_perimeter_speed = 80% external_perimeters_first = 0 extra_perimeters = 1 extra_perimeters_on_overhangs = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.9 fill_angle = 35 fill_density = 15% fill_pattern = adaptivecubic first_layer_acceleration = 800 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.84 first_layer_height = 0.6 first_layer_speed = 30 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 0 gap_fill_speed = 0 gcode_comments = 0 gcode_label_objects = disabled gcode_resolution = 0.0125 gcode_substitutions = M116;"M116 S10";; infill_acceleration = 500 infill_anchor = 1 infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.9 infill_first = 0 infill_overlap = 30% infill_speed = 80 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.6 max_print_speed = 80 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_bead_width = 85% min_feature_size = 25% min_skirt_length = 0 mmu_segmented_region_interlocking_depth = 0 mmu_segmented_region_max_width = 0 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhang_speed_0 = 15 overhang_speed_1 = 15 overhang_speed_2 = 20 overhang_speed_3 = 25 overhangs = 1 perimeter_acceleration = 600 perimeter_extruder = 1 perimeter_extrusion_width = 0.9 perimeter_generator = arachne perimeter_speed = 80 perimeters = 3 post_process = print_settings_id = raft_contact_distance = 0.3 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 6 skirt_height = 1 skirts = 0 slice_closing_radius = 0.049 slicing_mode = regular small_perimeter_speed = 40 solid_infill_acceleration = 800 solid_infill_below_area = 10 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.9 solid_infill_speed = 80 spiral_vase = 0 staggered_inner_seams = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 0 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 0 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.7 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 20 support_material_with_sheath = 1 support_material_xy_spacing = 50% support_tree_angle = 40 support_tree_angle_slow = 25 support_tree_branch_diameter = 2 support_tree_branch_diameter_angle = 5 support_tree_branch_diameter_double_wall = 3 support_tree_branch_distance = 1 support_tree_tip_diameter = 0.8 support_tree_top_rate = 15% thick_bridges = 0 thin_walls = 1 top_fill_pattern = rectilinear top_infill_extrusion_width = 0.84 top_solid_infill_acceleration = 600 top_solid_infill_speed = 60 top_solid_layers = 3 top_solid_min_thickness = 0 travel_acceleration = 1500 travel_speed = 500 travel_speed_z = 0 wall_distribution_count = 1 wall_transition_angle = 10 wall_transition_filter_deviation = 25% wall_transition_length = 100% wipe_tower = 0 wipe_tower_acceleration = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_cone_angle = 0 wipe_tower_extra_flow = 100% wipe_tower_extra_spacing = 100% wipe_tower_extruder = 0 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 [filament:AMBOT ABS] bed_temperature = 70 bridge_fan_speed = 75 compatible_printers = compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 1 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" extrusion_multiplier = 0.96 fan_always_on = 0 fan_below_layer_time = 60 filament_colour = #FF5B5B filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 0 filament_density = 0 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 0 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "" filament_purge_multiplier = 100% filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_restart_extra_toolchange = nil filament_retract_speed = nil filament_settings_id = "" filament_soluble = 0 filament_spool_weight = 0 filament_stamping_distance = 0 filament_stamping_loading_speed = 20 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = PLA filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = (Unknown) filament_wipe = nil first_layer_bed_temperature = 70 first_layer_temperature = 255 full_fan_speed_layer = 0 idle_temperature = nil inherits = max_fan_speed = 0 min_fan_speed = 0 min_print_speed = 10 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 5 start_filament_gcode = "; Filament gcode\n" temperature = 255 [filament:AMBOT PETG] bed_temperature = 60 bridge_fan_speed = 75 compatible_printers = compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 1 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_colour = #C9CDD6 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 0 filament_density = 0 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 0 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "" filament_purge_multiplier = 100% filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_restart_extra_toolchange = nil filament_retract_speed = nil filament_settings_id = "" filament_soluble = 0 filament_spool_weight = 0 filament_stamping_distance = 0 filament_stamping_loading_speed = 20 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = PLA filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = (Unknown) filament_wipe = nil first_layer_bed_temperature = 65 first_layer_temperature = 239 full_fan_speed_layer = 0 idle_temperature = nil inherits = max_fan_speed = 50 min_fan_speed = 35 min_print_speed = 10 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 5 start_filament_gcode = "; Filament gcode\n" temperature = 240 [filament:Custom Hatchbox ABS] bed_temperature = 70 bridge_fan_speed = 75 compatible_printers = compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 1 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_colour = #FF5B5B filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 0 filament_density = 0 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 0 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "" filament_purge_multiplier = 100% filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_restart_extra_toolchange = nil filament_retract_speed = nil filament_settings_id = "" filament_soluble = 0 filament_spool_weight = 0 filament_stamping_distance = 0 filament_stamping_loading_speed = 20 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = PLA filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = (Unknown) filament_wipe = nil first_layer_bed_temperature = 70 first_layer_temperature = 255 full_fan_speed_layer = 0 idle_temperature = nil inherits = max_fan_speed = 0 min_fan_speed = 0 min_print_speed = 10 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 5 start_filament_gcode = "; Filament gcode\n" temperature = 255 [filament:Hatchbox Matte] bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 1 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode" extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 100 filament_colour = #FF8000 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 30.24 filament_density = 1.24 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 15 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa" filament_purge_multiplier = 100% filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_restart_extra_toolchange = nil filament_retract_speed = nil filament_settings_id = "" filament_soluble = 0 filament_spool_weight = 201 filament_stamping_distance = 0 filament_stamping_loading_speed = 20 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = PLA filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = Prusa Polymers filament_wipe = nil first_layer_bed_temperature = 60 first_layer_temperature = 230 full_fan_speed_layer = 4 idle_temperature = nil inherits = Prusament PLA max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 15 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 15 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" temperature = 220 [filament:Hatchbox PETG] bed_temperature = 60 bridge_fan_speed = 75 compatible_printers = compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 1 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_colour = #C9CDD6 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 0 filament_density = 0 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 0 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "" filament_purge_multiplier = 100% filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_restart_extra_toolchange = nil filament_retract_speed = nil filament_settings_id = "" filament_soluble = 0 filament_spool_weight = 0 filament_stamping_distance = 0 filament_stamping_loading_speed = 20 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = PLA filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = (Unknown) filament_wipe = nil first_layer_bed_temperature = 65 first_layer_temperature = 240 full_fan_speed_layer = 0 idle_temperature = nil inherits = max_fan_speed = 50 min_fan_speed = 35 min_print_speed = 10 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 5 start_filament_gcode = "; Filament gcode\n" temperature = 240 [filament:Hatchbox PLA (custom)] bed_temperature = 57 bridge_fan_speed = 100 compatible_printers = compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 3 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" extrusion_multiplier = 0.96 fan_always_on = 0 fan_below_layer_time = 60 filament_colour = #F3C03A filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 0 filament_density = 1.25 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 0 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "" filament_purge_multiplier = 100% filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_restart_extra_toolchange = nil filament_retract_speed = nil filament_settings_id = "" filament_soluble = 0 filament_spool_weight = 0 filament_stamping_distance = 0 filament_stamping_loading_speed = 20 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = PLA filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = (Unknown) filament_wipe = nil first_layer_bed_temperature = 70 first_layer_temperature = 225 full_fan_speed_layer = 4 idle_temperature = nil inherits = max_fan_speed = 100 min_fan_speed = 60 min_print_speed = 20 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 30 start_filament_gcode = "; Filament gcode\n" temperature = 215 [filament:Hatchbox TPU] bed_temperature = 40 bridge_fan_speed = 50 compatible_printers = compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 2 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_colour = #3C3C3C filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 0 filament_density = 0 filament_deretract_speed = 0 filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 0 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "" filament_purge_multiplier = 100% filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = 0 filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_restart_extra_toolchange = nil filament_retract_speed = 20 filament_settings_id = "" filament_soluble = 0 filament_spool_weight = 0 filament_stamping_distance = 0 filament_stamping_loading_speed = 20 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = FLEX filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = (Unknown) filament_wipe = nil first_layer_bed_temperature = 45 first_layer_temperature = 220 full_fan_speed_layer = 0 idle_temperature = nil inherits = max_fan_speed = 20 min_fan_speed = 20 min_print_speed = 10 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 5 start_filament_gcode = "; Filament gcode\n" temperature = 220 [filament:Prusament PLA - Copy] bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 1 enable_dynamic_fan_speeds = 0 end_filament_gcode = "; Filament-specific end gcode" extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 100 filament_colour = #FF8000 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 20 filament_density = 1.24 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 15 filament_minimal_purge_on_wipe_tower = 15 filament_multitool_ramming = 0 filament_multitool_ramming_flow = 10 filament_multitool_ramming_volume = 10 filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa" filament_purge_multiplier = 100% filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_length_toolchange = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_restart_extra_toolchange = nil filament_retract_speed = nil filament_settings_id = "" filament_soluble = 0 filament_spool_weight = 201 filament_stamping_distance = 0 filament_stamping_loading_speed = 20 filament_toolchange_delay = 0 filament_travel_lift_before_obstacle = nil filament_travel_max_lift = nil filament_travel_ramping_lift = nil filament_travel_slope = nil filament_type = PLA filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = Prusa Polymers filament_wipe = nil first_layer_bed_temperature = 60 first_layer_temperature = 215 full_fan_speed_layer = 4 idle_temperature = nil inherits = Prusament PLA max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 15 overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 slowdown_below_layer_time = 15 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" temperature = 215 [printer:AMB C1 - 0.4 nozzle] autoemit_temperature_commands = 1 bed_custom_model = bed_custom_texture = bed_shape = 0x0,550x0,550x250,0x250 before_layer_gcode = \n \n between_objects_gcode = binary_gcode = 0 color_change_gcode = M600 cooling_tube_length = 5 cooling_tube_retraction = 91.5 default_filament_profile = default_print_profile = deretract_speed = 0 end_gcode = G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X400 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y ;Disable all steppers but Z\n \n \n extra_loading_move = -2 extruder_colour = "" extruder_offset = 0x0 gcode_flavor = reprapfirmware high_current_on_filament_swap = 0 host_type = octoprint inherits = layer_gcode = ;layer:[layer_num] machine_limits_usage = emit_to_gcode machine_max_acceleration_e = 2000,5000 machine_max_acceleration_extruding = 1250,1250 machine_max_acceleration_retracting = 1250,1250 machine_max_acceleration_travel = 1000,1250 machine_max_acceleration_x = 1500,1000 machine_max_acceleration_y = 1500,1000 machine_max_acceleration_z = 200,200 machine_max_feedrate_e = 120,120 machine_max_feedrate_x = 550,200 machine_max_feedrate_y = 550,200 machine_max_feedrate_z = 8,5 machine_max_jerk_e = 4,2.5 machine_max_jerk_x = 6,4 machine_max_jerk_y = 6,4 machine_max_jerk_z = 3.33,0.4 machine_min_extruding_rate = 0,0 machine_min_travel_rate = 0,0 max_layer_height = 0 max_print_height = 550 min_layer_height = 0.07 multimaterial_purging = 140 nozzle_diameter = 0.4 parking_pos_retraction = 92 pause_print_gcode = M601 print_host = printer_model = printer_notes = printer_settings_id = printer_technology = FFF printer_variant = printer_vendor = printhost_apikey = printhost_cafile = remaining_times = 1 retract_before_travel = 5 retract_before_wipe = 100% retract_layer_change = 1 retract_length = 2 retract_length_toolchange = 10 retract_lift = 1 retract_lift_above = 0 retract_lift_below = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 40 silent_mode = 0 single_extruder_multi_material = 0 start_gcode = M140 S[first_layer_bed_temperature]; set bed temperature\nM568 P0 R{first_layer_temperature[0]-30} S[first_layer_temperature] A2; set hotend temperatures\nM116 S10; Wait for temperature\n\nM557 X{if first_layer_print_min[0] > 10}[first_layer_print_min_0]{else}10{endif}:{if first_layer_print_max[0] <540}[first_layer_print_max_0]{else}540{endif} Y{if first_layer_print_min[1] > 10}[first_layer_print_min_1]{else}10{endif}:{if first_layer_print_max[1] < 240}[first_layer_print_max_1]{else}240{endif} P {round(first_layer_print_size[0]/60)+1}: {round(first_layer_print_size[1]/30)+1}\n \nG32 ;home and bed level\n\nM568 P0 A2\nM116 P0 S10\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion template_custom_gcode = thumbnails = thumbnails_format = PNG toolchange_gcode = travel_lift_before_obstacle = 0 travel_max_lift = 2 travel_ramping_lift = 1 travel_slope = 45 use_firmware_retraction = 0 use_relative_e_distances = 1 use_volumetric_e = 0 variable_layer_height = 0 wipe = 1 z_offset = 0 [printer:AMB C1 - 0.6 nozzle] autoemit_temperature_commands = 1 bed_custom_model = bed_custom_texture = bed_shape = 0x0,550x0,550x250,0x250 before_layer_gcode = \n \n between_objects_gcode = binary_gcode = 0 color_change_gcode = M600 cooling_tube_length = 5 cooling_tube_retraction = 91.5 default_filament_profile = default_print_profile = deretract_speed = 0 end_gcode = G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X400 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y ;Disable all steppers but Z\n \n \n extra_loading_move = -2 extruder_colour = #800000 extruder_offset = 0x0 gcode_flavor = reprapfirmware high_current_on_filament_swap = 0 host_type = octoprint inherits = layer_gcode = ;layer:[layer_num] machine_limits_usage = emit_to_gcode machine_max_acceleration_e = 2000,5000 machine_max_acceleration_extruding = 1250,1250 machine_max_acceleration_retracting = 1250,1250 machine_max_acceleration_travel = 1000,1250 machine_max_acceleration_x = 1500,1000 machine_max_acceleration_y = 1500,1000 machine_max_acceleration_z = 200,200 machine_max_feedrate_e = 120,120 machine_max_feedrate_x = 550,200 machine_max_feedrate_y = 550,200 machine_max_feedrate_z = 8,5 machine_max_jerk_e = 4,2.5 machine_max_jerk_x = 6,4 machine_max_jerk_y = 6,4 machine_max_jerk_z = 3.33,0.4 machine_min_extruding_rate = 0,0 machine_min_travel_rate = 0,0 max_layer_height = 0 max_print_height = 550 min_layer_height = 0.07 multimaterial_purging = 140 nozzle_diameter = 0.6 parking_pos_retraction = 92 pause_print_gcode = M601 print_host = printer_model = printer_notes = printer_settings_id = printer_technology = FFF printer_variant = printer_vendor = printhost_apikey = printhost_cafile = remaining_times = 1 retract_before_travel = 5 retract_before_wipe = 100% retract_layer_change = 1 retract_length = 2 retract_length_toolchange = 10 retract_lift = 1 retract_lift_above = 0 retract_lift_below = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 40 silent_mode = 0 single_extruder_multi_material = 0 start_gcode = M140 S[first_layer_bed_temperature]; set bed temperature\nM568 P0 R{first_layer_temperature[0]-30} S[first_layer_temperature] A2; set hotend temperatures\nM116 S10; Wait for temperature\n\nM557 X{if first_layer_print_min[0] > 10}[first_layer_print_min_0]{else}10{endif}:{if first_layer_print_max[0] <540}[first_layer_print_max_0]{else}540{endif} Y{if first_layer_print_min[1] > 10}[first_layer_print_min_1]{else}10{endif}:{if first_layer_print_max[1] < 240}[first_layer_print_max_1]{else}240{endif} P {round(first_layer_print_size[0]/60)+1}: {round(first_layer_print_size[1]/30)+1}\n \nG32 ;home and bed level\n\nM568 P0 A2\nM116 P0 S10\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion template_custom_gcode = thumbnails = thumbnails_format = PNG toolchange_gcode = travel_lift_before_obstacle = 0 travel_max_lift = 2 travel_ramping_lift = 1 travel_slope = 45 use_firmware_retraction = 0 use_relative_e_distances = 1 use_volumetric_e = 0 variable_layer_height = 0 wipe = 1 z_offset = 0 [printer:AMB C1 - 0.8 Nozzle] autoemit_temperature_commands = 1 bed_custom_model = bed_custom_texture = bed_shape = 0x0,550x0,550x250,0x250 before_layer_gcode = \n \n between_objects_gcode = binary_gcode = 0 color_change_gcode = M600 cooling_tube_length = 5 cooling_tube_retraction = 91.5 default_filament_profile = default_print_profile = deretract_speed = 0 end_gcode = G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X400 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y ;Disable all steppers but Z\n \n \n extra_loading_move = -2 extruder_colour = #800000 extruder_offset = 0x0 gcode_flavor = reprapfirmware high_current_on_filament_swap = 0 host_type = octoprint inherits = layer_gcode = ;layer:[layer_num] machine_limits_usage = emit_to_gcode machine_max_acceleration_e = 2000,5000 machine_max_acceleration_extruding = 1250,1250 machine_max_acceleration_retracting = 1250,1250 machine_max_acceleration_travel = 1000,1250 machine_max_acceleration_x = 1500,1000 machine_max_acceleration_y = 1500,1000 machine_max_acceleration_z = 200,200 machine_max_feedrate_e = 120,120 machine_max_feedrate_x = 550,200 machine_max_feedrate_y = 550,200 machine_max_feedrate_z = 5.8,5 machine_max_jerk_e = 4,2.5 machine_max_jerk_x = 6,4 machine_max_jerk_y = 6,4 machine_max_jerk_z = 3.33,0.4 machine_min_extruding_rate = 0,0 machine_min_travel_rate = 0,0 max_layer_height = 0 max_print_height = 550 min_layer_height = 0.07 multimaterial_purging = 140 nozzle_diameter = 0.8 parking_pos_retraction = 92 pause_print_gcode = M601 print_host = printer_model = printer_notes = printer_settings_id = printer_technology = FFF printer_variant = printer_vendor = printhost_apikey = printhost_cafile = remaining_times = 1 retract_before_travel = 5 retract_before_wipe = 100% retract_layer_change = 1 retract_length = 2 retract_length_toolchange = 10 retract_lift = 1 retract_lift_above = 0 retract_lift_below = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 40 silent_mode = 0 single_extruder_multi_material = 0 start_gcode = M140 S[first_layer_bed_temperature]; set bed temperature\nM568 P0 R{first_layer_temperature[0]-30} S[first_layer_temperature] A2; set hotend temperatures\nM116 S10; Wait for temperature\n\nM557 X{if first_layer_print_min[0] > 10}[first_layer_print_min_0]{else}10{endif}:{if first_layer_print_max[0] <540}[first_layer_print_max_0]{else}540{endif} Y{if first_layer_print_min[1] > 10}[first_layer_print_min_1]{else}10{endif}:{if first_layer_print_max[1] < 240}[first_layer_print_max_1]{else}240{endif} P {round(first_layer_print_size[0]/60)+1}: {round(first_layer_print_size[1]/30)+1}\n \nG32 ;home and bed level\n\nM568 P0 A2\nM116 P0 S10\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion template_custom_gcode = thumbnails = thumbnails_format = PNG toolchange_gcode = travel_lift_before_obstacle = 0 travel_max_lift = 2 travel_ramping_lift = 1 travel_slope = 45 use_firmware_retraction = 0 use_relative_e_distances = 1 use_volumetric_e = 0 variable_layer_height = 0 wipe = 1 z_offset = 0 [presets] print = 0.40 mm Balanced @ AMB 0.8 Nozzle sla_print = sla_material = printer = AMB C1 - 0.8 Nozzle filament = Hatchbox PLA (custom)